November 7th, 2018 at 3:59 PM ^
And you can't can you! Just try it! Ya filthy animals!
November 7th, 2018 at 4:02 PM ^
I just upvoted you and it moved you from 1925 to 1927. Are you fibbing?
November 7th, 2018 at 4:06 PM ^
I dunno bout dat. I just downvoted you and your totals went down accordingly.
Might want to edit that one a bit. Maybe put something in about kittens and end it with a Go Blue or something.
November 7th, 2018 at 8:09 PM ^
MGoKittins!
November 7th, 2018 at 4:15 PM ^
Well, we'll all just have to POINT you in the other direction with a good filthy NEGBANG, you unclean animal!
November 7th, 2018 at 5:20 PM ^
My points haven't changed since the changeover.
Don't really care, but I'm apparently the only one.
Edit: And I'm wrong. It must have been fixed today. That's the first post I've made that has changed my point total! Well done whoever handles that!
November 7th, 2018 at 8:17 PM ^
Mine have been at 5361 since the changeover. Not a big deal to me.
Edit: and I got a point. Yay?
November 8th, 2018 at 3:10 PM ^
Yeah mine haven't changed since the changeover either.
Edit: My points actually went up. Well I'll be a monkey's uncle. I sit corrected.
November 7th, 2018 at 4:01 PM ^
We can't figure out why they work on our staging site but not when we push them. Been several weeks in a row we've tried.
November 7th, 2018 at 4:03 PM ^
Have you tried unplugging and plugging it back in?
November 7th, 2018 at 4:04 PM ^
You must be in IT.
November 7th, 2018 at 4:04 PM ^
I think they need to jiggle the handle. That usually works...
November 7th, 2018 at 4:07 PM ^
its the fly wheel. needs some headlight oil. a little 3-in-1 and it'll be point city!
EDIT: and mine just changed. so at least for now the fly wheel of points is working...
November 7th, 2018 at 4:10 PM ^
It's all ball bearings nowadays. Now you prepare that Fetzer valve with some 3-in-1 oil and some gauze pads.
November 8th, 2018 at 7:17 AM ^
It's all ball bearings nowadays.
November 7th, 2018 at 4:21 PM ^
Duct tape, WD-40, and of course, elbow grease. The Ultimate fixers.
Learned that from my dad decades ago, XM. I thought you'd know of such modern miracles by now.
November 7th, 2018 at 4:32 PM ^
touch it in the back.
November 7th, 2018 at 5:03 PM ^
Don't forget windex!
November 7th, 2018 at 5:43 PM ^
I saw a sign in an auto plant a long time ago about this. "If it moves and it shouldn't, use duct tape. If it doesn't move but it should, use WD-40."
November 7th, 2018 at 6:02 PM ^
I always KNEW dad was on to something!
November 7th, 2018 at 6:56 PM ^
I'm going with a faulty flux capacitor
November 7th, 2018 at 4:10 PM ^
Or maybe just "bangin" it?
November 7th, 2018 at 4:13 PM ^
Is the light blinking orange? Because if so, it should be solid green.
November 7th, 2018 at 4:23 PM ^
Don't forget to blow in the cartridge before plugging it back in
November 7th, 2018 at 4:40 PM ^
Cartridge? You meant vacuum tube, right?
November 7th, 2018 at 11:27 PM ^
NES games that were stuck blinking or the graphics were distorted!
November 7th, 2018 at 4:50 PM ^
You've gotta take it out and blow on it!
November 7th, 2018 at 5:35 PM ^
If that doesn’t work try hitting it with a hammer. If that fails to fix the problem, hit it with a bigger hammer.
November 8th, 2018 at 2:10 PM ^
When I tried hitting it with a bigger hammer, I got a message that said U Can't Touch This
November 8th, 2018 at 2:56 PM ^
This'll fix it....
November 7th, 2018 at 4:10 PM ^
You owe me 12 points.
I am this close to redeeming them for a gas BBQ.
Thank you.
November 7th, 2018 at 4:20 PM ^
The boys want to get a row boat, while the girls have their hearts set on a sewing machine.
November 7th, 2018 at 4:17 PM ^
Take the cartridge out, blow on it, and put it back in. Also, U-D-U-D-L-R-L-R-A-A-B-B, boom 30 guys
November 7th, 2018 at 4:22 PM ^
U-U-D-D-L-R-L-R-B-A
November 7th, 2018 at 4:39 PM ^
And "Start".
November 7th, 2018 at 5:30 PM ^
Yep, that sounds right. It's been too long...
November 7th, 2018 at 4:19 PM ^
The thing about giving it a good kicking is that even if it doesn't fix it you have vented a little.
November 7th, 2018 at 4:59 PM ^
How do you kick a website?
November 7th, 2018 at 5:02 PM ^
Hammering Panda has the fix:
November 7th, 2018 at 6:05 PM ^
This looks so 1980s.
November 7th, 2018 at 6:40 PM ^
I've already tried that.
November 7th, 2018 at 4:33 PM ^
Try Ctrl+Alt+Del
November 7th, 2018 at 4:37 PM ^
Seth, I'm just here for the negbang.
November 7th, 2018 at 4:41 PM ^
HUEL sucks so bad that they can’t replicate production? Sorry you paid them so much money...
November 7th, 2018 at 4:53 PM ^
You have never been involved with software or web development I guess.
November 7th, 2018 at 6:34 PM ^
I have, actually. For years... The IDE will never be production, but you should have any configuration issues identified and known between the two. Clearly, they do not. Perhaps forgivable if it's a fairly new environment, but this has been going for over a year. And I'll bet a dollar that the problem is configuration...